Discontinued: High-pressure dosing pump with 500 ml/min stainless steel pump head

Touchscreen control, automatic pump head recognition

This product has been discontinued. Take a look at the new BlueShadow 80P.

The Preparative Pump 80P delivers stable and precise solvent flow for semi-preparative as well as preparative HPLC applications. By adding one or more additional pumps, binary, ternary or even quaternary high-pressure gradient systems can be easily configured. The pump can also be equipped with a binary or ternary gradient valve block to configure cost-effective low-pressure gradient systems. Exchangeable pump heads for flow rates up to 1 000 ml/min and pressures up to 40 MPa make it possible to easily optimize the pump to changing performance requirements and allow simple maintenance. Available in stainless steel or biocompatible titanium versions, the pump heads enable a wide range of applications.

Max. flow rate	500 ml/min
Flow rate increment	0.01 ml/min
Pressure range
Maximum delivery pressure [psi]	1450 psi
Maximum delivery pressure [MPa]	10 MPa
Maximum delivery pressure [bar]	100 bar
Pump head materials	Stainless Steel
Maximum viscosity	1000 cP
Liquid temperature range	4−60 °C (39.2−140 °F)
Gradient	Isocratic
Leak management	-
Wetted materials	FFKM, GFP (graphite fiber reinforced PTFE), PEEK, ruby, sapphire, stainless steel, Zirconium oxide, Titanium
Pump features	Piston seal wash, RFID for automatic pump head detection, Active pulsation compensation, Standalone control and programming, Integrated pressure sensor

Best working conditions	5-400 ml/min
Continuous working conditions	5-200 ml/min
Flow rate accuracy	± 2 %
Flow rate accuracy conditions	measured at 5 - 50 % of flow range using ethanol/water 10:90
Flow rate precision	< 0.1 % RSD
Flow rate precision conditions	measured at 5 - 50 % of flow range using ethanol/water 10:90
HPG: gradient accuracy	± 2 % (5 - 95 %, measured at 5 - 50 % of flow range, water/caffeine tracer)
HPG: gradient precision	1 % RSD, based on retention time at constant room temperature
LPG: gradient accuracy	± 3 % (5 - 95 %, measured at 5 - 50 % of the flow range, water/caffeine tracer)
LPG: gradient precision	2 % RSD, based on retention time at constant room
Active piston seal wash	+
Piston seal washing	+
Pump Outlet thread	Female M8 x 1 (coned)
Pump head inlet (standard)	M8 x 1 (flat bottom)
Pump head outlet (standard)	M8 x 1 (coned)

Control	LAN; analog and event controlled
Inputs	flow rate
Outputs	pressure; 8 event outputs (TTL, OC, relays)
Analog inputs	0-10 V
Analog outputs	1, 2 or 5 V

Power supply	100 - 240 V, 50 - 60 Hz
Dimensions	242 mm x 201 mm x 397 mm (W × H × D)
Weight	10.1 kg
Leak sensor	No
Ambient conditions	temperature range: 10–40 °C; 50–104 °F air humidity: below 90 % humidity (non condensing)
Note	Acessory Kit includes PTFE tubing and PETP bushing/sealing ring for standard applications. For applications with aggressive solvents, PEEK or stainless steel parts are available.

Certified Quality

KNAUER is known for the quality of its products and has been certified several times. We produce high-tech laboratory instruments for research, routine analysis and production.
See all Quality certificates

In addition, we have extended documentation about all our products, including CE Declarations of Conformity.
See all CE Declarations of conformity

Innovation and quality - since 1962. Made in Germany.