EN DE
Contact us
print page
Article No.: APD20LC
Articlename: BlueShadow Pump 80P

High-pressure dosing pump with 250 ml/min titanium pump head


Touchscreen control, automatic pump head recognition

The Preparative Pump 80P delivers stable and precise solvent flow for semi-preparative as well as preparative HPLC applications. By adding one or more additional pumps, binary, ternary or even quaternary high-pressure gradient systems can be easily configured. The pump can also be equipped with a binary or ternary gradient valve block to configure cost-effective low-pressure gradient systems. Exchangeable pump heads for flow rates up to 1 000 ml/min and pressures up to 40 MPa make it possible to easily optimize the pump to changing performance requirements and allow simple maintenance. Available in stainless steel or biocompatible titanium versions, the pump heads enable a wide range of applications.

Technical Data

General Information

Max. flow rate 250 ml/min
Flow rate increment 0.01 ml/min
Maximum delivery pressure [psi] 3260 psi
Maximum delivery pressure [bar] 200 bar
Maximum delivery pressure [MPa] 22.5 MPa
Pressure range
Pump head materials Titanium
Maximum viscosity 1000 cP
Liquid temperature range 4−60 °C (39.2−140 °F)
Gradient Isocratic
Leak management -
Wetted materials Titanium, aluminum oxide (Al2O3), FKM, GFP (graphite fiber reinforced PTFE), PEEK, ruby, sapphire
Note Pressure sensor membrane made of stainless steel; limited wetting in fluidic path

Detailed information

Best working conditions 2.5-200 ml/min
Continuous working conditions 2.5-100 ml/min
Flow rate accuracy ± 2 %
Flow rate accuracy conditions measured at 5 - 50 % of flow range using ethanol/water 10:90
Flow rate precision < 0.1 % RSD
Flow rate precision conditions measured at 5 - 50 % of flow range using ethanol/water 10:90
HPG: gradient accuracy ± 2 % (5 - 95 %, measured at 5 - 50 % of flow range, water/caffeine tracer)
HPG: gradient precision 1 % RSD, based on retention time at constant room temperature
LPG: gradient accuracy ± 3 % (5 - 95 %, measured at 5 - 50 % of the flow range, water/caffeine tracer)
LPG: gradient precision 2 % RSD, based on retention time at constant room
Active piston seal wash +
Piston seal washing +
Pump head inlet (standard) M8 x 1 (flat bottom)
Pump head outlet (standard) M8 x 1 (coned)

Communication

Control LAN; analog and event controlled
Inputs flow rate
Outputs pressure; 8 event outputs (TTL, OC, relays)
Analog inputs 0-10 V
Analog outputs 1, 2 or 5 V

General

Power supply 100 - 240 V, 50 - 60 Hz
Dimensions 397 mm x 242 mm x 201 mm (W × H × D)
Weight 10.1 kg
Leak sensor no
Ambient conditions temperature range: 10–40 °C; 50–104 °F
air humidity: below 90 % humidity (non condensing)
Note Acessory Kit includes PTFE tubing and PETP bushing/sealing ring for standard applications. For applications with aggressive solvents, PEEK or stainless steel parts are available.

Documents and more information

Do you need more details or a quote?

We are happy to help you

Technical data are subject to change without notice.
All trade names and registered trademarks are the property of their respective owners.

Follow us