The mikron 81 flow cell is biocompatible and designed for a flow rate of up to 100 ml/min. The flow cell is a spare part, the main unit ADG61GD is required for operation.
The mikron 81 is a reliable in-line conductivity monitor with a very small footprint and measures with high linearity in the range of 0.002 to 500 mS/cm. Its state-of-the-art temperature sensor technology enables high-precision automatic temperature correction of conductivity measurement. The intelligent design of the flow cell enables a wide flow range from the microliter to the lower liter per minute.
Flow cell for mikron 81 for up to 100 ml/min
| Flow cell type | Conductivity flow cell |
|---|---|
| Body material | Titanium |
| Biocompatible | Yes |
| Capillary connection | UNF 1/4-28, flat bottom |
| Wetted materials | Titanium, PEEK |
| Flow cell volume | 11 µl |
| Bore size | 1.0 mm |
| Max. flow rate | 100 ml/min |
| Maximum pressure | Max. 171 bar (depending on utilized ferrule and fitting, see linked FAQ) |
| Back pressure | < 0.1 bar at 100 ml/min, ~1 bar at 500 ml/min (water, room temperature) |
| Note | Color code: blue. 50 cm-1 nominal cell constant |
to connect with 1/16" or 1/8" OD capillaries
Article No.: FZG10
Show product
to connect with 1/16" or 1/8" OD capillaries
Article No.: FZG11
Show product
Supplement for mikron 81 including hexagon socket key, USB-C-USB-A cable (3 m), and operation manual
Article No.: ADG6102
Show product
to connect an 1/4" OD capillary to a 1/4-28 UNF port
Article No.: A7230
Show product
to connect an 1/4" OD capillary with an 1/8" OD capillary
Article No.: A7229
Show product
Gasket for mikron 81 for liquid-tight connection of monitor unit and flow cell
Article No.: ADG6103
Show product
Flow cell for conductivity monitor micron 81 for up to 1000 ml/min
Article No.: AMO90
Show product
Conductivity monitor mikron 81 with biocompatible flow cell for up to 100 ml/min
Article No.: ADG61GD
Show product
Conductivity monitor mikron 81 with biocompatible flow cell for up to 1000 ml/min
Article No.: ADG61GE
Show product
KNAUER is known for the quality of its products and has been certified several times. We produce high-tech laboratory instruments for research, routine analysis and production.
See all Quality certificates
In addition, we have extended documentation about all our products, including CE Declarations of Conformity.
See all CE Declarations of conformity
Innovation and quality - since 1962. Made in Germany.
We are happy to help you
Mo – Fr
07:00 – 17:00 CE(S)T
24 / 7
Technical data or prices are subject to change without notice. Prices may vary by country and do not include taxes, customs duties or delivery. All trademarks are the property of their respective owners.Our general terms and conditions apply: www.knauer.net/terms
