EN DE

High-pressure dosing pump titanium without pump head

Contact us
print page
Article No.: APD60
Articlename: BlueShadow Pump 80P

High-pressure dosing pump titanium without pump head


without pump head

The preparative Pump 80P delivers stable and precise solvent flow for semi-preparative as well as preparative HPLC applications. By adding one or more additional pumps, binary, ternary or even quaternary high-pressure gradient systems can be easily configured. The pump can also be equipped with a binary or ternary gradient valve block to configure cost-effective low-pressure gradient systems. Exchangeable pump heads for flow rates up to 1 000 ml/min and pressures up to 40 MPa make it possible to easily optimize the pump to changing performance requirements and allow simple maintenance. The integrated automatic recognition of the pump head with RFID technology allows fast adaptions of the pump for various applications.

Technical Data

General information

Maximum viscosity 1000 cP
Liquid temperature range 4−60 °C (39.2−140 °F)
Gradient Isocratic
Leak management Yes
Wetted materials aluminum oxide (Al2O3), FFKM, PEEK, Titanium
Pump features RFID for automatic pump head detection, Active pulsation compensation, Standalone control and programming, Integrated pressure sensor, Piston seal wash

Detailed information

Flow rate accuracy ± 2 %
Flow rate accuracy conditions measured at 5 - 50 % of flow range using ethanol/water 10:90
Flow rate precision < 0.1 % RSD
Flow rate precision conditions measured at 5 - 50 % of flow range using ethanol/water 10:90
HPG: gradient accuracy ± 2 % (5 - 95 %, measured at 5 - 50 % of flow range, water/caffeine tracer)
HPG: gradient precision 1 % RSD, based on retention time at constant room temperature
LPG: gradient accuracy ± 3 % (5 - 95 %, measured at 5 - 50 % of the flow range, water/caffeine tracer)
LPG: gradient precision 2 % RSD, based on retention time at constant room
Active piston seal wash +
Piston seal washing +
Pump Outlet thread Female UNF 10-32 (coned)
Pump head inlet (standard) M8 x 1 (flat bottom)
Pump head outlet (standard) M8 x 1 (coned)

Communication

Interfaces keypad; LAN; RS-232; pin header connectors (events control and remote control)
Control stand-alone via keypad; digital via LAN or RS-232; analog via remote control pin header connector
Inputs flow rate
Outputs pressure; 8 event outputs (TTL, OC, relays)
Analog inputs 0-10 V
Analog outputs 1, 2 or 5 V

General

Power supply 100 - 240 V, 50 - 60 Hz
Dimensions 242 x 191 x 407 mm (W × H × D) with mounted pump head and capillaries
Weight 13.2 kg ( with mounted pump head and capillaries)
Leak sensor No
Ambient conditions temperature range: 10–40 °C; 50–104 °F
air humidity: below 90 % humidity (non condensing)
Note Acessory Kit includes PTFE tubing and PETP bushing/sealing ring for standard applications. For applications with aggressive solvents, PEEK or stainless steel parts are available.

Documents and more information

Certified Quality 

KNAUER is known for the quality of its products and has been certified several times. We produce high-tech laboratory instruments for research, routine analysis and production.
See all Quality certificates

In addition, we have extended documentation about all our products, including CE Declarations of Conformity.
See all CE Declarations of conformity
 

Innovation and quality - since 1962. Made in Germany.

Do you need more details or a quote?

We are happy to help you

+49 30 809727-0

Mo – Fr
07:00 – 17:00 CE(S)T

sales@knauer.net

24 / 7
 

Technical data or prices are subject to change without notice. Prices may vary by country and do not include taxes, customs duties or delivery.
All trademarks are the property of their respective owners.Our general terms and conditions apply: www.knauer.net/terms

Follow us on: