EN DE

Mass flow meter/controller, 2 - 833 ml/min

Contact us
print page
Article No.: A5391
Articlename: Mini CORI-Flow (M14) flowmeter

Mass flow meter/controller, 2 - 833 ml/min


including mounting block

Mini CORI-Flow are precise and compact mass flowmeters and controllers, based on the Coriolis measuring principle. Coriolis flowmeters are unmatched in accuracy. When applied for liquids, the mass flow accuracy is better than ±0,2% Rd.

Instruments of the mini CORI-Flow series contain a uniquely shaped, single loop sensor tube, forming part of an oscillating system. When a fluid flows through the tube, Coriolis forces cause a variable phase shift, which is detected by sensors and fed into the integrally mounted pc-board. The resulting output signal is strictly proportional to the real mass flow rate. The mini CORI-Flow features density and temperature of the fluid as secondary outputs.

Key Features

Technical Data

Flowmeter

Flow rate range 2 - 833 ml/min
Flow rate accuracy ± 0.2 % of rate *
Wetted materials stainless steel AISI 316 or equivalent optional Hastelloy-C22

Communication

Outputs 0 – 5 (10) Vdc or 0 (4) – 20 mA
Control standard: RS–232 (8-pinDIN male connection) Profibus-DP® bus:(5-pin M12 female; power 8-pin DIN male)DeviceNet™ Modebus-RTU; LonWorks Flow bus (5–pin M12 male)

General

Power supply +15–24VDC ±10 % max. ripple recommended: 50mV tt
Weight Meter: 1.2 kgController: 1.7 kg

Other

Note * optimal accuracy will be reach after approx. 30 minutes after instrument power up

Documents and more information

Do you need more details or a quote?

We are happy to help you

Technical data or prices are subject to change without notice. Prices may vary by country and do not include taxes, customs duties or delivery.
All trademarks are the property of their respective owners.Our general terms and conditions apply: www.knauer.net/terms

Follow us