EN DE

How to change LAN settings to fixed IP address or DHCP by Firmware Wizard?

KNAUER devices are factory set to a dynamic IP address (DHCP). To ensure a permanent LAN connection between the chromatography software and the device set a fixed (static) IP address. The Firmware Wizard can be used to change LAN settings. If supported by your PC a direct LAN connection with selected devices can be used. Otherwise use a switch/router. Please find a list of AZURA devices with corresponding firmware versions below. Changing LAN settings does not work when the firmware wizard is connected to devices. Please disconnect before using this feature. 

Procedure in Firmware Wizard
1) Select Reset LAN Settings
2) Enter the serial number of the AZURA device
3) Select fixed IP address (use following IP address) or DHCP (obtain an IP address automatically)
    For fixed IP address enter IP address, Subnet mask and Gateway.
4) Press Reset Communication Settings

 

 

Watch the video tutorial. The first part shows changing LAN settings by Mobile Control, the second part by Firmware Wizard (from 2:02 min).

 

 

Changing LAN settings with Firmware Wizard is supported for following devices/firmware versions.


Alternatively, Mobile Control can be used to change LAN settings.
How to change LAN settings to fixed IP address or DHCP by Mobile Control?

Do you need more information?

Please contact us!

Follow us on: