EN DE

DISCONTINUED: Conductivity monitor with flow cell for up to 100 ml/min and optional pH measurement

Contact us
print page
Article No.: ADG30GD
Articlename: AZURA CM 2.1S with flow cell up to 100 ml/min

DISCONTINUED: Conductivity monitor with flow cell for up to 100 ml/min and optional pH measurement


Conductivity monitor with optional pH measurement

The AZURA CM 2.1S is a reliable conductivity monitor which is usually utilized in FPLC to follow salt gradients. By adding a pH sensor also pH values can be measured.

Wetted parts are completely biocompatible. The contactless measurements of conductivity reduces the risk of carryover to a minimum.

The flow cell covers a flow rate up to 100 ml/min and is delivered with the CM 2.1S.

Technical Data

Flow cell

Flow cell type Contactless conductivity flow cell
Biocompatible Yes
Connection of flow cell Female 10-32" UNF or M8x1 thread (PEEK) – both included in shipment
Capillary connection 1/16" or 1/8" – both included in shipment
Wetted materials PEEK
Flow cell volume 300 µl
Max. flow rate 100 ml/min (recommended: 10 – 100 ml/min)
Maximum pressure 100 bar

Detection

Detector type Conductivity monitor
Measurement accuracy Conductivity: ± 2 % full scale value (0.1 - 300 mS/cm), ± 5 % full scale value (300 - 999 mS/cm)
Temperature: ± 1.0°C
pH 2 - 12: ± 0.2 pH (15 - 25°C), ± 0.5 pH (4 - 40°C)
Measurement range Conductivity: 0.1 - 999 mS/cm
pH: 0 - 14
Linearity Conductivity: ± 1 % full scale value (0.1 - 300 mS/cm), ± 1 % full scale value (300 - 999 mS/cm)
pH measurement Optionally
Maximum data rate 5 Hz
Supported electrodes All pH electrodes with BNC connector and a voltage output of maximal ± 500 mV

Communication

Digital outputs LAN; RS-232

Technical parameters

GLP Electronic serial number
Display LCD, 2 x 8 characters
Ambient conditions Operating temperature: 4 – 40°C, 39,2 – 104 °F
Relative humidity: below 90 %, non condensing

General

Power supply 100 - 240 V, 50 - 60 Hz, max. 20 W
Dimensions 121 x 129 x 187 mm (W x H x D)
Weight 3.2 kg

Documents and more information

Certified Quality 

KNAUER is known for the quality of its products and has been certified several times. We produce high-tech laboratory instruments for research, routine analysis and production.
See all Quality certificates

In addition, we have extended documentation about all our products, including CE Declarations of Conformity.
See all CE Declarations of conformity
 

Innovation and quality - since 1962. Made in Germany.

Do you need more details or a quote?

We are happy to help you

+49 30 809727-0

Mo – Fr
07:00 – 17:00 CE(S)T

sales@knauer.net

24 / 7
 

Technical data or prices are subject to change without notice. Prices may vary by country and do not include taxes, customs duties or delivery.
All trademarks are the property of their respective owners.Our general terms and conditions apply: www.knauer.net/terms

Follow us on: