Overview of adjustable Flow Splitters
We offer adjustable Flow Splitters for analytical, semi-preparative and preparative applications.
Analytical post-column Flow Splitters for flow rates of 0.25 - 5.0 ml/min
The default inlet flow for calibration is 1.0 ml/min. However, please always specify your inlet flow (0.25 - 5 ml/min) before order. This way we can assure optimum pressure drop across the splitter, even if the inlet flow differs from the default calibration inlet flow rate.
For orders of spare parts please provide the part number and the serial number of the splitter.
Flow Splitter | Split ratio [min.] | Split ratio [max.] | Inline Filter | Inline filter housing | Replacement Resistor |
---|---|---|---|---|---|
A1770-1 | 50:1 | 1000:1 | A58156 | A58159 | A58161 |
A1770-2 | 15:1 | 300:1 | A58156 | A58159 | A58162 |
A1770-3 | 5:1 | 100:1 | A58156 | A58159 | A58163 |
A1770-4 | 1:1 | 20:1 | A58156 | A58159 | A58164 |
Max. operating pressure: 350 bar / 5.000 psi
Wetted materials: Stainless Steel, PEEK, Teflon
Dimensions (HxWxD): 12.2 cm x 10.2 cm x 13 cm (4.8" x 4" x 5.1")
Semi-preparative post-column Flow Splitters for flow rates of 5.0 - 40 ml/min
The default inlet flow for calibration is 20.0 ml/min. However, please always specify your inlet flow (5.0 - 40 ml/min) before order. This way we can assure optimum pressure drop across the splitter, even if the inlet flow differs from the default calibration inlet flow rate.
For orders of spare parts please provide the part number and the serial number of the splitter.
Flow Splitter | Split ratio [min.] | Split ratio [max.] | Inline Filter | Inline filter housing | Replacement Resistor |
---|---|---|---|---|---|
A5816-2 | 1000:1 | 20.000:1 | A58152 | A58159 | A58165 |
A5816-3 | 100:1 | 2.000:1 | A58152 | A58159 | A58166 |
A5816-4 | 15:1 | 300:1 | A58152 | A58159 | A581511 |
A5816-5 | 1:1 | 20:1 | A58152 | A58159 | A58153 |
Max. operating pressure: 350 bar / 5.000 psi
Wetted materials: Stainless Steel, PEEK, Teflon
Dimensions (HxWxD): 12.2 cm x 10,2 cm x 13 cm (4.8" x 4" x 5.1")
Preparative post-column Flow Splitters
The preparative flow splitters are set to a custom split ratio. Therefore, please always specify your inlet flow and the desired split ration before order.
Please note, that the port of the low flow rate outlet has a UNF 10-32 threadi and is for 1/16" OD capillaries. For the ports of the Inlet and the high flow rate outlet we offer also versions with UNF 5/16-24 thread for 1/8" OD capillaries as indicated in the tabel below.
For orders of spare parts please provide the part number and the serial number of the splitter.
Flow Splitter | Flow rate | Port size (Inlet & Outlet of high flow) |
Inline Filter | Inline filter housing | Replacement Resistor |
---|---|---|---|---|---|
A5815-1 | 40 - 125 ml/min | 1/16" OD UNF 10-32 thread |
A58157 | A58159 | A58167 |
A5815-2 | 75 - 200 ml/min | 1/16" OD UNF 10-32 thread |
A58158 | A58159 | A58151 |
A5815-3 | 75 - 200 ml/min | 1/8" OD UNF 5/16-24 thread |
A58155 | A58160 | A58151 |
A5815-4 | 100 - 1 000 ml/min | 1/16" OD UNF 10-32 thread |
A58158 | A58159 | A58168 |
A5815-5 | 100 - 1 000 ml/min | 1/8" OD UNF 5/16-24 thread |
A58155 | A58160 | A58168 |
Wetted materials: Stainless Steel, PEEK, Teflon
Dimensions (HxWxD): 12.2 cm x 10.2 cm x 13 cm (4.8" x 4" x 5.1")